Report Environment | Command Dictionary |
|
|
The output from the Report Environment command may look like the following:
abort limit | = 30/50 |
|
atpg compression | = OFF |
|
bist initialization | = 0 |
|
capture clock | = none |
|
checkpoint | = OFF |
|
clockpo patterns | = ON |
|
clock restriction | = clock_po |
|
contention check | = ON, mode = bus, handling = warning | |
control threshold | = 4 |
|
observe threshold | = 4 |
|
fails report | = OFF |
|
fault mode | = uncollapsed |
|
fault type | = stuck |
|
gate level | = design |
|
gate report | = normal |
|
iddq checks | = none, handling = warning | |
iddq strobe | = label |
|
learn reporting | = OFF |
|
logfile handling | = OFF |
|
net dominance | = |
|
net resolution | = |
|
observation point | = master |
|
pattern source | = internal |
|
possible credit | = 50% |
|
pulse generators | = ON |
|
RAM initialization | = uninitialized |
|
RAM test mode | = static_pass_thru |
|
random atpg | = ON |
|
random clocks | = none |
|
random patterns | = 1024 |
|
random weight default | = 50.0000 |
|
screen display | = ON |
|
simulation mode | = combinational | depth = 0 |
skew load | = OFF |
|
system mode | = setup |
|
trace report | = off |
|
Z handling | = int=X ext=X |
|
Zhold behavior | = ON |
|
Related Commands |
|
|
All SET commands | Write Environment (FT) |
FastScan and FlexTest Reference Manual, V8.6_4 |