Mentor v8.6_4 manual Command Summary

Command SummaryCommand Dictionary

Table 2-1. Command Summary [continued]

	D
	F
	T	F	F
Command	I	S	T	Description
Set Multiple Load		∙		Specifies how the tool handles multiple scan
				loads.
Set Net Dominance		∙	∙	Specifies the fault effect of bus contention on
				tri-state nets.
Set Net Resolution		∙	∙	Specifies the behavior of multi-driver nets.
Set Nonscan Model			∙	Specifies how FlexTest classifies the behavior
				of non-scan cells with the HOLD and INITX
				functionality during the operation of the scan
				chain.
Set Number Shifts		∙		Sets the number of shifts for loading or
				unloading the scan chains.
Set Observation Point		∙		Specifies the observation point for random
				pattern fault simulation.
Set Observe Threshold		∙		Specifies the minimum number of
				observations necessary for the Analyze
				Observe command to consider a point
				adequately observed.
Set Output Comparison			∙	Specifies whether FlexTest performs a good
				circuit simulation comparison.
Set Output Mask			∙	Specifies how FlexTest handles an unknown
				(X) state in an external pattern set.
Set Pathdelay Holdpi		∙		Specifies whether the ATPG keeps non-clock
				primary inputs at a constant state after the first
				force.
Set Pattern Source		∙	∙	Specifies the source of the patterns for future
				Run commands.

2-20 FastScan and FlexTest Reference Manual, V8.6_4