FastScan and FlexTest Reference Manual, V8.6_4
2-496
Set Gate Report Command Dictionary
SKew_load — A literal specifying use of the skew_load procedure. In
the test procedure file, this procedure describes how to propagate the
output value of the preceding scan cell into the master memory element
of the current cell (without changing the slave), for all scan cells.
SHADOW_Control — A literal specifying use of the shadow_control
procedure. In the test procedure file, this procedure describes how to
load the contents of a scan cell into the associated shadow.
Master_observe — A literal specifying use of the master_observe
procedure. In the test procedure file, this procedure describes how to
place the contents of a master into the output of its scan cell.
SHADOW_Observe — A literal specifying use of the shadow_observe
procedure. In the test procedure file, this procedure describes how to
place the contents of a shadow into the output of its scan cell.
STate_stability — A literal specifying display of the simulation values
for the load_unload procedure and the capture clock cycle that the tool
used to determine the constant value state elements at the initial load
time. The report separates the shift procedure values, load_unload
procedure values, and the capture clock cycle with parentheses. This
format provides information that is helpful when you are trying to debug
boundary scan.
The state_stability option is not a procedure.
-All — An optional switch specifying use of all times in the test procedure
file. This is the default.
time — An optional positive integer, greater than 0, that specifies a time in
the test procedure file.
•Parallel_pattern pattern_number (FastScan Only)
A literal and integer pair that specifies the pattern number from the last
simulation pass that you want the Report Gates command to use when
displaying the value of a gate. The pattern_number must be an integer between
0 and 31 (0—64 for Digital Equipment Corporation AlphaStation Systems).
-All — An optional switch specifying use of all times in the test procedure
file.