Command Dictionary | Set Schematic Display |
|
|
∙-Compact
A switch that specifies for DFTInsight to display only those gates in the netlist that could have a logical impact on the output results. This is the default behavior upon invocation of DFTInsight.
If gate compaction is enabled, DFTI still maintains the inversion value of the signals. DFTI displays the inversion values by showing plus signs (+) and minus signs
∙-NOCompact
A switch that specifies for DFTInsight to display all netlist gates, including buffers, inverters, Zval, and
∙-Query threshold
A switch and integer pair that specifies the maximum number of gates that you want DFTInsight to display without first asking if you want to continue. The threshold value is the number of total gates in the netlist, not just the number of compacted gates. The invocation default is
∙-NOQuery
A switch that specifies for DFTInsight to display any size of display netlist you request. This can be a performance issue with very large gate counts.
∙-Hide type
A switch and literal pair that specifies whether you want DFTInsight to place nets and port symbols on any input and output pins that are not driving (or being driven by) other instances that reside within the display netlist.
The extra nets and ports tend to clutter the display, but they also allow you a way of selecting a single net to trace. The literal choices for the type parameter are as follows:
UO — A literal that specifies to hide the unused output connections and to only display the unused input connections. This is the default upon invocation of DFTInsight.
FastScan and FlexTest Reference Manual, V8.6_4 |
