Write Initial States | Command Dictionary |
|
|
Write Initial States
Tools Supported: FlexTest
Scope: All modes
Usage
WRIte INitial States filename
Description
Writes the initial state settings of design instances into the file that you specify.
The Write Initial States command writes different information regarding the initialization settings depending on the mode from which you issue the command. If FlexTest is in the Setup mode, the command writes the initialization settings that you created by using the Add Initial States command. If FlexTest is in any other mode, the command writes all the initial state settings (including those in any test_setup procedures).
Arguments
∙filename
A required string that specifies the file where you want FlexTest to write the initialization settings.
∙
An optional switch that replaces the contents of the file if the filename already exists.
∙
An optional switch that writes the initialization settings for all design hierarchical instances. This is the default.
∙instance_name
An optional repeatable string that specifies the name of a design hierarchical instance for which you want to write the initialization setting.
FastScan and FlexTest Reference Manual, V8.6_4 |
