Command Dictionary Delete Primary Inputs
FastScan and FlexTest Reference Manual, V8.6_4 2-205
•-Class User | System | Full
An optional switch and literal pair that specifies the class code of the
designated primary input pins. The valid class code literal names are as
follows:
User — A literal specifying that the primary inputs were added using the
Add Primary Inputs command. This is the default class.
System — A literal specifying that the primary inputs derive from the
netlist.
Full — A literal specifying that the primary inputs consists of both user and
system classes.
Examples
The following example deletes an extra added primary input from the user class of
primary inputs:
add primary inputs indata2 indata4 indata6
delete primary inputs indata4 -class user
Related Commands
Add Primary Inputs
Report Primary Inputs Write Primary Inputs