Command Dictionary Save Patterns
FastScan and FlexTest Reference Manual, V8.6_4 2-409
-TSTl2 — A switch that writes the patterns in Toshiba Standard Tester
Interface Language 2.
-Utic — A switch that writes the patterns in the Motorola UTIC format.
•-NOInitialization
A switch that writes patterns without creating the initialization cycle in the
pattern file. The -Noinitialization switch is valid with the following AVI
output formats:
The -Noinitialization switch is valid with all enhanced AVI output formats. For
more information on the enhanced AVI, see “Enhanced Procedure File” in the
Design-for-Test: Common Resources Manual.
•timing_filename
An optional string that specifies the name of the file from which you want to
read the non-scan event timing information. You cannot use this argument with
the -Ascii or -Binary formats or with proc_filename.
•proc_filename
An optional string that specifies the name of the enhanced procedure file from
which you want to read the non-scan event timing information. You cannot use
this argument with the -Ascii or -Binary formats or with timing_filename.
•-TIMingfile
An optional switch which specifies for the tool to save patterns using the old
AVI output which gets its timing information from the timing file specified on
the command line. This is the default. See the “Test Pattern Formatting and
Timing” chapter in the Scan and ATPG Process Guide for the description of
the timing file and how to create it. You cannot use this switch with the
-Procfile switch.
oLSITdl oMGcwdb
oSTil oTSSIWgl (Ascii and Binary)
oUtic oVerilog
oVHdl o