Command Dictionary | Write Core Memory |
|
|
Write Core Memory
Tools Supported: FlexTest
Scope: All modes
Usage
WRIte COre Memory filename
Description
Writes to a file the amount of memory that FlexTest requires to avoid paging during the ATPG and simulation processes.
The Write Core Memory command writes the same information as the Report Core Memory command except it writes to the file that you specify rather than to the transcript. The peak memory requirement is generally much larger than the real memory required during the ATPG and fault simulation processes.
Arguments
∙filename
A required string that specifies the name of the file where FlexTest is to write the current memory usage statistics.
∙
An optional switch that replaces the contents of the file if the filename already exists.
Examples
The following example writes to the specified file the amount of memory required to avoid memory paging during the ATPG and simulation processes:
write core memory /user/design1/core_memory.file
FastScan and FlexTest Reference Manual, V8.6_4 |
