Command Dictionary Set Clockpo Patterns
FastScan and FlexTest Reference Manual, V8.6_4 2-455
Set Clockpo Patterns
Tools Supported: FastScan
Scope: Setup mode
Usage
SET CLockpo Patterns ON | OFf
Description
Specifies whether ATPG can perform pattern creation for primary outputs that
connect to clocks.
The Set Clockpo Patterns command specifies whether the ATPG can create
patterns that measure clock-connected primary outputs and then treat the clocks as
regular primary inputs.
Arguments
•ON
A literal that allows the ATPG to create patterns that measure clock-connected
primary outputs. This option also allows you to use random patterns of this
type. This is the invocation default behavior.
•OFf
A literal that prevents the ATPG from creating patterns that measure clock-
connected primary. This also prevents you from using random patterns of this
type.
Examples
The following example specifies that the ATPG will not create patterns that
measure clock-connected primary outputs:
set clockpo patterns on
set system mode atpg
add faults -all
run
save patterns pat1