Command Dictionary Report Primary Inputs
FastScan and FlexTest Reference Manual, V8.6_4 2-357
Report Primary Inputs
Tools Supported: FastScan and FlexTest
Scope: All modes
Usage
REPort PRimary Inputs [-All | net_pathname... | primary_input_pin...] [-Class
{Full | User | System}]
Description
Displays the specified primary inputs.
The Report Primary Inputs command displays a list of the primary inputs of a
circuit. You can choose to display either the user class, system class, or full
classes of primary inputs. Additionally, you can display all the primary inputs or a
specific list of primary inputs. If you issue the command without specifying any
arguments, then the tool displays all the primary inputs.
Arguments
•-All
An optional switch that displays all the primary inputs. This is the default.
•net_pathname
An optional repeatable string that specifies the circuit connections whose user-
class primary inputs you want to display.
•primary_input_pin
An optional repeatable string that specifies a list of system-class primary input
pins that you want to display.
•-Class Full | User | System
An optional switch and literal pair that specifies the source (or class) of the
primary input pins which you want to display. The literal choices are as
follows:
Full — A literal that displays all the primary input pins in the user and
system class. This is the default.