Command Dictionary

Report Pin Constraints

 

 

Report Pin Constraints

Tools Supported: FastScan and FlexTest

Scope: All modes

Usage

For FastScan

REPort PIn Constraints

For FlexTest

REPort PIn Constraints [-All primary_input_pin...]

Description

Displays the pin constraints of the primary inputs.

The Report Pin Constraints command displays the pin constraints added to the primary inputs with the Add Pin Constraints command.

The Report Pin Constraints command, as does the Add Pin Constraints command, performs slightly differently depending on whether you are using FastScan or FlexTest. The following paragraphs described how the command operates for each tool.

FastScan Specifics

The command displays the constraints on all the primary inputs which you restricted to be at a constant value during the ATPG process.

FlexTest Specifics

The command displays the cycle behavior constraints of the specified primary inputs. If you do not specify any primary input pins, the command displays the constraints of all the primary inputs. You can change the cycle behavior constraints of the primary inputs by using either the Add Pin Constraints or Setup Pin Constraints commands.

FastScan and FlexTest Reference Manual, V8.6_4

2-353

Page 381
Image 381
Mentor v8.6_4 manual Report Pin Constraints