Command Dictionary | Add Primary Outputs |
|
|
Add Primary Outputs
Tools Supported: FastScan and FlexTest
Scope: Setup mode
Usage
ADD PRimary Outputs net_pathname...
Description
Adds primary outputs.
The Add Primary Outputs command adds an additional primary output to each specified net. Once added, the tool defines them as user class primary outputs. The tool defines the primary outputs described in the original netlist as system class primary outputs. You can display the user class, system class, or full classes of primary outputs using the Report Primary Outputs command.
Arguments
∙net_pathname
A required repeatable string that specifies the nets to which you want to add primary outputs.
Examples
The following example adds a new primary output to the circuit and places it in the user class of primary outputs:
add primary outputs outdata1
Related Commands |
|
Delete Primary Outputs | Write Primary Outputs (FT) |
Report Primary Outputs |
|
FastScan and FlexTest Reference Manual, V8.6_4 |
