Mentor v8.6_4 manual Command Summary

Command SummaryCommand Dictionary

Table 2-1. Command Summary [continued]

	D
	F
	T	F	F
Command	I	S	T	Description
Set Driver Restriction		∙	∙	Specifies whether the tool allows multiple
				drivers on buses and multiple active ports on
				gates.
Set Fails Report		∙	∙	Specifies whether the design rules checker
				displays clock rule failures.
Set Fault Mode		∙	∙	Specifies whether the fault mode is collapsed
				or uncollapsed.
Set Fault Sampling			∙	Specifies the fault sampling percentage.
Set Fault Type		∙	∙	Specifies the fault model for which the tool
				develops or selects ATPG patterns.
Set Flatten Handling	∙	∙	∙	Specifies how the tool globally handles
				flattening violations.
Set Gate Level	∙	∙	∙	Specifies the hierarchical level of gate
				reporting and displaying.
Set Gate Report		∙	∙	Specifies the additional display information
				for the Report Gates command.
Set Hypertrophic Limit			∙	Specifies the percentage of the original
				design’s sequential primitives that can differ
				from the good machine before the tool
				classifies them as hypertrophic faults.
Set Iddq Checks		∙	∙	Specifies the restrictions and conditions that
				you want the tool to use when creating or
				selecting patterns for detecting IDDQ faults.
Set Iddq Strobe		∙	∙	Specifies on which patterns (cycles) the tool
				will simulate IDDQ measurements.

2-18 FastScan and FlexTest Reference Manual, V8.6_4