
Command Dictionary | Load Faults |
|
|
∙pin_pathname
The third column must be the pin pathname.
∙cell_name
The fourth column is the cell name enclosed in parenthesis. When present, this column indicates the type of cell in which the fault resides.
∙net_name
The fifth column is the net name enclosed in parenthesis. When present, this column indicates the net in which the fault resides.
When you issue this command, the tool discards all patterns in the current test pattern set.
Comments must be on a line by themselves.
Note
Comments cannot be on the end of a fault information line. If a fault information line is greater than 5 columns, the tool does not add the fault on that line to the faultlist.
Arguments
∙filename
A required string that specifies the name of the file containing the fault list that you want to load.
∙
An optional switch that specifies for the tool to retain the fault class of each fault that is in the fault list.
When you read in a fault class and try to maintain the fault classes within the fault file, the following rules apply:
oIf the fault class is EQ, the tool uses the fault class of the previous fault in the file.
FastScan and FlexTest Reference Manual, V8.6_4 |