Mentor v8.6_4 manual 316

Report Gates Command Dictionary

The following describes the fields for the write port message line:

Identifies the gate index number of the first data input line for a given write port. In the list of gate inputs, the other address inputs will immediately follow.

Identifies the gate index number of the first address line for a given write port. In the list of gate inputs, the other address inputs will immediately follow.

write port: write=G/G (vvv-v-v) first_adr=G first_di=G stability=vv

Identifies the behavior of the

write clock and write enable lines for a given write port:

Identifies the following stability behavior for a given write port, respectively:

write control stability write load stability

The values can be either of the following:

S(stable) U (unstable)

G/G	Two gate index numbers separated by a “/”.
	First G is the write clock line.
	Second G is the write enable line. A “-”means there is no enable line.

(vvv-v-v) Up to five values indicating the behavior of the following conditions, respectively:

clock_off_enable_off

clock_on_enable_off (Not shown if there is no enable line.) clock_off_enable_on (Not shown if there is no enable line.) two optional clock information values separated by dashes (-)

The first three values can be any of the following:

X(write X)

0 (write 0)

1 (write 1)

H (hold old values) P (potential write)

The last two values can be either of the following:

CLK (write clock connected to scan clock)

IH (write clock line is inactive high)

2-316 FastScan and FlexTest Reference Manual, V8.6_4