Mentor v8.6_4 - page 513

Command Dictionary Set Flatten Handling
FastScan and FlexTest Reference Manual, V8.6_4 2-485
FN4 — An instance net is not used. The default upon invocation is
warning.
FN5 — A multiple driven wired net. The default upon invocation is
warning.
FN6 — A bus net attribute cannot be used. The default upon invocation is
warning.
FN7 — Two connected nets have inconsistent net attributes. The default
upon invocation is warning and both attributes are not used.
FN8 — Parallel wired behavior. The default upon invocation is warning.
FN9 — The bus net has multiple different bus keepers. The default upon
invocation is warning and their effects are additive.
Following are the pin rules:
FP1 — The circuit has no primary inputs. The default upon invocation is
warning.
FP2 — The circuit has no primary outputs. The default upon invocation is
warning.
FP3 — The primary input drives logic gates and switch gates. The default
upon invocation is warning.
FP4 — A pin is moved. The default upon invocation is warning.
FP5 — A pin was deleted by merging. The default upon invocation is
warning.
FP6 — Merged wired in/out pins. The default upon invocation is warning
FP7 — Merged wired input and output pins. The default upon invocation is
warning.
FP8 — A module boundary pin has no name. The default upon invocation
is warning.
FP9 — An in/out pin is used as output only. The default upon invocation is
ignore.
FP10 — An output pin is used as in/out pin. The default upon invocation is
ignore.