Mentor v8.6_4 manual Delete Primary Outputs, ∙ primaryoutputpin

Delete Primary Outputs Command Dictionary

Delete Primary Outputs

Tools Supported: FastScan and FlexTest

Scope: Setup mode

Usage

DELete PRimary Outputs {net_pathname... primary_output_pin... -All} [-Class {User System Full}]

Description

Removes the specified primary outputs from the current netlist.

The Delete Primary Outputs command deletes from a circuit the primary outputs that you specify. You can delete either the user class, system class, or full classes of primary outputs. If you do not specify a class, the tool deletes the primary outputs from the user class.

You can display a list of any class of primary outputs by using the Report Primary Outputs command.

Arguments

∙net_pathname

A repeatable string that specifies the circuit connections that you want to delete. You can specify the class of primary outputs to delete with the -Class switch.

∙primary_output_pin

A repeatable string that specifies a list of primary output pins that you want to delete. You can specify the class of primary outputs to delete with the -Class switch.

∙-All

A switch that deletes all primary outputs. You can specify the class of primary outputs to delete with the -Class switch.

∙-Class User System Full

An optional switch and literal pair that specifies the class code of the primary output pins that you specify. The valid literal names are as follows:

2-206 FastScan and FlexTest Reference Manual, V8.6_4