Mentor v8.6_4 manual ∙ floatingobjectname

Add Tied Signals Command Dictionary

∙floating_object_name

A required repeatable string that specifies the floating nets or pins to which you want to assign a specific value. The tool assigns the tied value to all floating nets or pins in all modules that have the names that you specify.

If you do not specify the -Pin option, the tool assumes the name is a net name. If you do specify the -Pin option, the tool assumes the name is a pin name.

∙-Pin

An optional switch specifying that the floating_object_name argument that you provide is a floating pin name.

Examples

The following example ties all floating signals in the circuit that have the net names vcc and vdd, to logic 1 (tied to high):

add tied signals 1 vcc vdd

Related Commands
Delete Tied Signals	Setup Tied Signals
Report Tied Signals

2-118 FastScan and FlexTest Reference Manual, V8.6_4