FastScan and FlexTest Reference Manual, V8.6_4
2-356
Report Pin Strobes Command Dictionary
Report Pin Strobes
Tools Supported: FlexTest
Scope: All modes
Usage
REPort PIn Strobes [-All | primary_output_pin...]
Description
Displays the current pin strobe timing for the specified primary output pins.
The Report Pin Strobes command displays the strobe time of each primary output
pin that you specify. If you issue the command without any arguments, FlexTest
displays all of the pin strobes.
Arguments
•-All
An optional switch that displays the pin strobe values for all of the primary
output pins. This is the default.
•primary_output_pin
An optional repeatable string that specifies a list of primary output pins whose
pin strobe timing you want to display.
Examples
The following example displays the strobe times of all primary outputs:
set test cycle 3
add pin strobes 1 outdata1 outdata3
report pin strobes
Related Commands
Add Pin Strobes
Delete Pin Strobes Setup Pin Strobes