Mentor v8.6_4 manual Command Summary

Command DictionaryCommand Summary

Table 2-1. Command Summary [continued]

	D
	F
	T	F	F
Command	I	S	T	Description
Set Stability Check		∙		Specifies whether the tool checks the effect of
				applying the main shift procedure on non-scan
				cells.
Set Static Learning		∙	∙	Specifies whether FastScan or FlexTest
				performs the learning analysis to make the
				ATPG process more efficient.
Set Stg Extraction			∙	Specifies whether FlexTest performs state
				transition graph extraction.
Set System Mode		∙	∙	Specifies the system mode you want the tool
				to enter.
Set Test Cycle			∙	Specifies the number of timeframes per test
				cycle.
Set Trace Report		∙	∙	Specifies whether the tool displays gates in
				the scan chain trace.
Set Transition Holdpi		∙		Specifies for FastScan to freeze all primary
				input values other than clocks and RAM
				controls during multiple cycles of pattern
				generation.
Set Unused Net			∙	Specifies whether FlexTest removes unused
				bus and wire nets in the design..
Set Workspace Size		∙		Increases the workspace so that FastScan can
				try to detect the undetected faults that were
				aborted due to workspace constraints.
Set Xclock Handling		∙		Specifies whether FastScan changes the
				sequential element model to always set the
				output of the element to be X when any of its
				clock inputs become X.

FastScan and FlexTest Reference Manual, V8.6_4 2-23