Command Dictionary Set Output Comparison
FastScan and FlexTest Reference Manual, V8.6_4 2-541
Set Output Comparison
Tools Supported: FlexTest
Scope: All modes
Usage
SET OUtput Comparison OFf | {ON [-X_ignore [None | Reference |
Simulated | Both]]} [-Io_ignore]
Description
Specifies whether FlexTest performs a good circuit simulation comparison.
The Set Output Comparison command allows you to specify for FlexTest to
compare good circuit simulation results to an external test pattern set. The purpose
is to verify the correctness of the simulation model.
The -X_ignore options will allow you to control whether x values in either
simulated results or reference output should be ignored when output comparison
capability is used.
Arguments
•OFf
A literal that prevents FlexTest from performing a comparison of the outputs.
This is the default upon invocation of FlexTest.
•ON
A literal that specifies for FlexTest to compare the good circuit simulation
results.
•-X_ignore None
A switch that specifies FlexTest to compare x values between the simulated
results and the reference output.
•-X_ignore Reference
A switch that specifies FlexTest to ignore the comparison between x values in
the reference output. This is the default.