Report Bus Data

Command Dictionary

 

 

Bidi — A literal that displays the bus data for the bidirectional buses that have possible contention problems. For the tool to place a bus in this category, the bidirectional pin must have only a single tri-state driver.

Fail — A literal that displays the bus data for the buses that failed the contention mutual exclusivity checking.

ABort — A literal that displays the bus data for the buses that aborted contention mutual exclusivity checking.

Buf (FastScan Only) A literal that displays the bus data for all buses that have the buffer learned behavior.

Xor (FastScan Only) A literal that displays the bus data for all buses that have the exclusive OR learned behavior.

Mux (FastScan Only) A literal that displays the bus data for all buses that have the multiplexer learned behavior.

AND (FastScan Only) A literal that displays the bus data for all buses that have the AND learned behavior.

OR (FastScan Only) A literal that displays the bus data for all buses that have the OR learned behavior.

POSS_Mult_dr_on (FastScan Only) A literal that displays the bus data for all buses that have a possibility of having multiple drivers turned on at the same time.

POSS_X (FastScan Only) A literal that displays the bus data for all buses that have a possibility of being at an unknown state.

POSS_Z (FastScan Only) A literal that displays the bus data for all buses that have a possibility of being at the high-impedance state.

HIstogram (FastScan Only) A literal that displays a summary of information identifying the number of buses that are in each of the possible categories.

ZPass (FastScan Only) A literal that displays the bus data for the buses that pass the E11 design rule.

ZFail (FastScan Only) A literal that displays the bus data for the buses that fail the E11 design rule check.

2-270

FastScan and FlexTest Reference Manual, V8.6_4

Page 298
Image 298
Mentor v8.6_4 manual 270