Delete Tied Signals

Command Dictionary

 

 

-Class User System Full

An optional switch and literal pair that specifies the class code of the tied floating nets or pins that you specify. The valid literal names are as follows:

User — A literal specifying that the tied floating nets or pins were added by using the Add Tied Signals command. This is the default class.

System — A literal specifying that the tied floating nets or pins derive from the netlist.

Full — A literal specifying that the tied floating nets or pins consist of both user and system classes.

-Pin

A switch specifying that the floating_object_name argument that you provide is a floating pin name.

Examples

The following example deletes the tied value from the user-class tied net “vcc”; thereby leaving “vcc” as a floating net:

add tied signals 1 vcc vdd

delete tied signals vcc -class user

Related Commands

 

Add Tied Signals

Setup Tied Signals

Report Tied Signals

 

2-218

FastScan and FlexTest Reference Manual, V8.6_4

Page 246
Image 246
Mentor v8.6_4 manual Add Tied Signals Setup Tied Signals Report Tied Signals