Command Dictionary

Set Gate Report

 

 

The format of the fault status data is as following:

<sa0-status:sa1-status>

where sa0-status and sa1-status are one of the following:

DS — Detected by simulation

DI — Detected by implication

PU — Possible detect untestable

PT — Possible detect testable

AU — Atpg untestable

UC — Undetected uncontrolled.

UO — Undetected unobserved.

UU— Untestable unused. BL — Untestable blocked. TI — Untestable tied.

RE — Untestable redundant.

The Report Display Instances command will report the fault detection status in DFTInsight message window.

Bist_data (FastScan Only)

A literal that specifies for the Report Gates command to display previously calculated control and observe values. To set the Bist_data option, you must do so prior to rules checking and you must re-execute the design rules checking process, otherwise no data (-) from this option will be available for gate reporting.

TIe_value

A literal that specifies for the Report Gates command to display the simulated values that result from all natural tied gates and learned constant value non- scan cells.

FastScan and FlexTest Reference Manual, V8.6_4

2-493

Page 521
Image 521
Mentor v8.6_4 manual ∙ Bistdata FastScan Only, ∙ TIevalue