Report Cell Constraints

Command Dictionary

 

 

Report Cell Constraints

Tools Supported: FastScan and FlexTest

Scope: All modes

Usage

REPort CEll Constraints

Description

Displays a list of all the constrained scan cells.

The Report Cell Constraints command displays a list of all the scan cells which you previously constrained to a constant value during the ATPG process using the Add Cell Constraints command. The display consists of the following four columns:

The first column specifies the constraint value of the scan cell.

The second column specifies the scan chain name. If you originally specified the cell constraint with a pin pathname, then this column is blank (dashes).

The third column specifies the position in the scan chain. If you originally specified the cell constraint with a pin pathname, then this column is blank (dashes).

The fourth column specifies the pin pathname of the scan cell constraint. If you originally specified the cell constraint with a chain name and position, then this column is blank (dashes).

Examples

The following example displays a list of all the constrained scan cells:

2-274

FastScan and FlexTest Reference Manual, V8.6_4

Page 302
Image 302
Mentor v8.6_4 manual Report Cell Constraints