Set Flatten Handling

Command Dictionary

 

 

FP11 — An input pin is used as in/out pin. The default upon invocation is ignore.

FP12 — An output pin has no fan-out. The default upon invocation is ignore.

FP13 — An input pin has a floating instance in the netlist module. This default upon invocation is warning.

Following are the gate rules:

FG1 — The defining model of an instance does not exist. The default upon invocation is error. If it is not an error condition, this instance is treated as an undefined primitive.

FG2 — The feedback gate is not in feedback loop. The default upon invocation is error.

FG3 — The bus keeper has no functional impact. The default upon invocation is warning.

FG4 — The RAM/ROM read attribute not supported. The default upon invocation is warning.

FG5 — The RAM attribute not supported. The default upon invocation is warning.

FG6 — The RAM type not supported. The default upon invocation is error.

FG7 — The netlist module has a primitive not supported. The default upon invocation is error. if non-error is chosen, this primitive is treated as undefined.

FG8 — The library model has a primitive not supported. The default upon invocation is error. If non-error is chosen, this primitive is treated as undefined.

Error

An optional literal that specifies for the tool to both display the error occurrence message and immediately terminate the rules checking.

If you do not specify the Error, Warning, Note, or Ignore option, then the tool uses either the handling from the last Set Flatten Handling command or, if you have not changed the handling, the tool uses the initial invocation setting.

2-486

FastScan and FlexTest Reference Manual, V8.6_4

Page 514
Image 514
Mentor v8.6_4 manual 486