Set Pulse Generators | Command Dictionary |
|
|
Set Pulse Generators
Tools Supported: FastScan and FlexTest
Scope: Setup mode
Usage
SET PUlse Generators ON OFf
Description
Specifies whether the tool identifies pulse generator sink (PGS) gates.
The Set Pulse Generators command specifies the identification control of PGS gates. When on, which is the default upon invocation of the tool, the tool identifies reconvergent PGS gates during the learning process. It then displays a summary message showing the number of identified PGS gates.
Arguments
∙ON
A literal that specifies for the tool to identify the PGS gates during the learning process. This is the default behavior upon invocation of the tool.
∙OFf
A literal that specifies for the tool not to identify the PGS gates.
Examples
The following example does not identify PGS gates during the learning process:
set pulse generators off set system mode atpg
Related Commands
Report Pulse Generators
FastScan and FlexTest Reference Manual, V8.6_4 |
