Mentor v8.6_4 manual 503

Command Dictionary Set Iddq Checks

∙-ALl

An optional switch that specifies to perform all checks.

∙-Bus

An optional switch that specifies not to allow contention conditions on bus gates.

∙-WEakbus

An optional switch that specifies not to allow contention conditions on weak- bus gates.

∙-Int_float

An optional switch that specifies not to allow a Z-state on internal buses.

∙-EXt_float

An optional switch that specifies not to allow a Z-state on external buses.

∙-Pull

An optional switch that specifies not to allow contention conditions on pull gates.

∙-Clock

An optional switch that specifies not to allow clock pins to be on during the IDDQ measure.

For FlexTest, the pin constraints of all clock inputs must not be at an on state at the last timeframe of each test cycle. Otherwise, the tool cannot perform an IDDQ measurement.

∙-WRite

An optional switch that specifies not to allow write control pins to be on during the IDDQ measure.

For FlexTest, the pin constraints of all write control inputs can not be at an on state at the last timeframe of each test cycle. Otherwise, the tool cannot perform an IDDQ measurement.

∙-REad

An optional switch that specifies not to allow read control pins to be on during the IDDQ measure.

FastScan and FlexTest Reference Manual, V8.6_4 2-503