Command Dictionary | Report Cone Blocks |
|
|
Report Cone Blocks
Tools Supported: FastScan and FlexTest
Scope: All modes
Usage
REPort COne Blocks
Description
Displays the current
The Report Cone Blocks command displays the output pin pathnames you identified as blockage points using the Add Cone Blocks command. The tool uses these blockage points in calculating the clock and effect cones. If you have not specified any blockage points, the tool automatically chooses the output pins that it uses in the calculations.
Examples
The following example displays the
add cone blocks
clock /LS0/Q effect /LS7/Q
Related Commands
Add Cone Blocks | Delete Cone Blocks |
FastScan and FlexTest Reference Manual, V8.6_4 |