Command Dictionary | Report Paths |
|
|
Report Paths
Tools Supported: FastScan
Scope: Atpg, Good, and Fault modes
Usage
REPort PAths [-All path_name] [-Path gate_id_begin gate_id_end]
Description
Displays the path definitions of the specified loaded paths.
The Report Paths command displays the internal path list definitions for the paths that you specify. You load the path definitions into the internal path list by using the Load Paths command.
Arguments
∙
An optional switch that displays the definitions for all currently loaded paths. This is the default.
∙path_name
An optional string that specifies the name of the path whose definition you want to display. You define the paths in a path definition file which you must have previously loaded by using the Load Paths command.
∙-Path gate_id_begin gate_id_end
An optional switch and two integer triplet that specifies a particular path or portion of a path whose definition you want to display. You use this argument to report on paths that were not defined in a path definition file and therefore were not loaded using the Load Paths command.
The two integer arguments specify two gate identification numbers that indicate the beginning and ending of the path. The path begins at gate_id_begin and ends with gate_id_end.
The value of the gate_id_begin and gate_id_end arguments is the unique identification number that FastScan automatically assigns to every gate within the design during the model flattening process.
FastScan and FlexTest Reference Manual, V8.6_4 |