Command Dictionary

Delete Lists

 

 

Delete Lists

Tools Supported: FastScan and FlexTest

Scope: Atpg, Fault, and Good modes

Usage

DELete LIsts pin_pathname... -All

Description

Removes the specified pins from the pin list that the tool monitors while in the Fault or Good simulation system mode.

The Delete Lists command deletes pins that the tool would otherwise include in the pin list while in the Fault simulation system mode or the Good circuit simulation system mode. To review the current list of pins, use the Report Lists command. To put additional pins on the list, use the Add Lists command.

Arguments

pin_pathname

A repeatable string that specifies the pins that you want to delete from the pin list.

-All

A switch that deletes all of the pins in the pin list.

Examples

The following example deletes an extra added output pin:

set system mode good

add lists i_1006/o i_1007/o i_1008/o delete lists i_1007/o

set list file listfile run

Related Commands

 

Add Lists

Set List File

Report Lists

 

FastScan and FlexTest Reference Manual, V8.6_4

2-183

Page 211
Image 211
Mentor v8.6_4 manual Delete Lists, Following example deletes an extra added output pin