Set Bus Simulation | Command Dictionary |
|
|
Set Bus Simulation
Tools Supported: FastScan
Scope: Atpg, Good, and Fault Modes
Usage
SET BUs Simulation [Local Global]
Description
Specifies whether the tool uses global or local bus simulation analysis.
This command simplifies typical back end verification flows by providing the option to turn off global analysis and use only the values that can be determined by inspecting the immediate input gates driving the bus.
The Report Environment command will display the analysis type currently in effect.
This command is provided for compatibility issues with tools that do not perform global analysis.
Arguments
∙Local
Specifies the tool to perform local bus simulation analysis.
∙Global
Specifies the tool to perform global bus simulation analysis. This is the default.
Examples
Related Commands
Report Environment
FastScan and FlexTest Reference Manual, V8.6_4 |
