Mentor v8.6_4 - page 43

Command Dictionary Command Summary

FastScan and FlexTest Reference Manual, V8.6_4 2-15

Report Test Stimulus •Displays the stimulus necessary to satisfy the

specified set, write, or read conditions.

Report Testability Data ••Analyzes collapsed faults for the specified

fault class and displays the analysis.

Report Tied Signals ••Displays a list of the tied floating signals and

pins.

Report Timeplate ••Displays the specified timeplate.

Report Version Data •Displays the current software version

information.

Report Write Controls ••Displays the currently defined write control

lines and their off-states.

Reset Au Faults ••Re-classifies the faults in certain untestable

categories.

Reset State ••Resets the circuit status.

Resume Interrupted

Process •Continues a command that you placed in a

suspended state by entering a Control-C

interrupt.

Run ••Runs a simulation or ATPG process.

Save Flattened Model •Saves the flattened circuit model, the scan

trace, and all DRC related information to a

specific file.

Save Patterns ••Saves the current test pattern set to a file in

the format that you specify.

Save Schematic ••Saves the schematic currently displayed by

DFTInsight.

Table 2-1. Command Summary [continued]

Command

TDescription