FastScan and FlexTest Reference Manual, V8.6_4
2-292
Report Drc Rules Command Dictionary
//-----------------------------------------------------------
//Begin scan chain identification process, memory elements=8.
//-----------------------------------------------------------
// Reading group test procedure file /user/design/tpf.
// Simulating load/unload procedure in g1 test procedure file.
// Chain = c1 successfully traced with scan_cells = 8.
// Error: Flipflop /FF1 (103) has clock port set to stable
high.(D7-1)
// Error: Rules checking unsuccessfule, cannot exit SETUP
mode.
Next, the example generates a display of a specific rule failure:
report drc rules d7-1
//Error: Flipflop /I$3 (16) has clock port set to stable high
(D7-1)
Related Commands
Set Drc Handling