Command Dictionary | Step |
|
|
Step
Tools Supported: FlexTest
Scope: Setup mode.
Usage
STEp [integer]
Description
The Reset State, Set Pattern Source and Set System Mode commands will reset the cycle count such that the next STEp command will start from the beginning of the external test set.
Arguments
∙integer
Specifies the number of cycles to be simulated. This number indicates a window of cycles to be simulated. The first cycle to be simulated is the cycle after the one last simulated.
The default for integer is one global cycle.
∙
An optional switch used to record several cycles of simulation data which can be displayed later with the REPort GAte command.
Related Commands |
|
Reset State | Set Pattern Source |
Set System Mode |
|
FastScan and FlexTest Reference Manual, V8.6_4 |