Mentor v8.6_4 manual Delete Faults Command Dictionary

Delete Faults Command Dictionary

a Multiple Input Signature Register (MISR). You can specify the -Untestable switch to remove these fault types.

Arguments

∙object_pathname

A repeatable string that specifies a list of pins, instances, or delay paths.

∙-All

A switch that deletes all faults in the current fault list.

∙-Stuck_at 01 1 0

An optional switch and literal pair that specifies the stuck-at values which you want to delete. The valid stuck-at literals are as follows:

01 — A literal that deletes both of the “stuck-at-0” and “stuck-at-1” faults. This is the default.

0 — A literal that deletes only the “stuck-at-0” faults.

1 — A literal that deletes only the “stuck-at-1” faults.

∙-Untestable

An optional switch that deletes all untestable faults identified.

∙-Both -Rise -Fall (FastScan only)

An optional switch that specifies which faults to delete for each path already added via the Add Paths command. These switches are used for path delay faults only.

-Both - An optional switch the specifies to delete both the slow to rise and slow to fall faults. This is the default.

-Rise - An optional switch that specifies to delete only the slow to rise faults.

-Fall - An optional switch that specifies to delete only the slow to fall faults.

2-172 FastScan and FlexTest Reference Manual, V8.6_4