Command Dictionary Command Summary
FastScan and FlexTest Reference Manual, V8.6_4 2-19
Set Instancename
Visibility •••Specifies whether DFTInsight displays
instance names immediately above each
instance in the Schematic View area.
Set Instruction Atpg •Specifies whether FlexTest generates
instruction-based test vectors using the
random ATPG process.
Set Internal Fault ••Specifies whether the tool allows faults within
or only on the boundary of library models.
Set Internal Name ••Specifies whether to delete or keep pin names
of library internal pins containing no-fault
attributes.
Set Interrupt Handling •Specifies how FlexTest interprets a Control-C
interrupt.
Set IO Mask •Modifies the behavior of IO pins so that their
expected values will always be X during test
cycles in which the primary input portion of
the IO pin is being forced.
Set Learn Report ••Specifies whether the Report Gates command
can display the learned behavior for a specific
gate.
Set List File ••Specifies the name of the list file into which
the tool places the pins’ logic values during
simulation.
Set Logfile Handling ••Specifies for the tool to direct the transcript
information to a file.
Set Loop Handling ••Specifies how the tool handles feedback
networks.
Table 2-1. Command Summary [continued]
Command
D
F
T
IF
SF
TDescription