Set Learn Report | Command Dictionary |
|
|
Set Learn Report
Tools Supported: FastScan and FlexTest
Scope: All modes
Usage
SET LEarn Report [OFf ON]
Description
Specifies whether the Report Gates command can display the learned behavior for a specific gate.
The Set Learn Report command specifies whether the Report Gates command should include the information that the tool collects during the static learning process. The application automatically performs the static learning process immediately after it flattens the simulation model, which happens when you leave the Setup mode or issue the Flatten Model command. The static learning process provides general information on the design that the tool can then use in speeding up the ATPG process (such as values that are impossible on other gates if the selected gate is at a specific value.)
Once you enable access to the static learned information with the Set Learn Report command, you can specify for the tool to display the learned information on a selected gate by using the Report Gates command.
While you can also access the learned information with the Report Gates command by using the
Arguments
∙OFf
An optional literal that disables access to the learned behavior information. This is the default.
FastScan and FlexTest Reference Manual, V8.6_4 |