Command Dictionary | Set Trace Report |
|
|
Set Trace Report
Tools Supported: FastScan and FlexTest
Scope: All modes
Usage
SET TRace Report OFf ON
Description
Specifies whether the tool displays gates in the scan chain trace.
The Set Trace Report command controls whether the tool displays all of the gates in the scan chain trace during rules checking.
Arguments
∙OFf
A literal that specifies for the tool not to display gates in the scan chain trace. This is the default behavior upon invocation of the tool.
∙ON
A literal that specifies for the tool to display gates in the scan chain trace during rules checking.
Examples
The following example displays the gates in the scan chain trace during rules checking:
add scan groups group1 scanfile
add scan chains chain1 group1 indata2 outdata4 set trace report on
set system mode atpg
Related Commands
Add Scan Chains | Report Scan Chains |
FastScan and FlexTest Reference Manual, V8.6_4 |