Mentor v8.6_4 manual ∙ elementpathname

Add Nonscan Handling Command Dictionary

Hold — A literal that specifies for the state of this type of element to remain undisturbed when FlexTest operates the scan chain.

INITX — A literal specifying that the logic state of the non-scan element is unknown when FlexTest finishes operating the scan chain.

INIT0 — A literal that specifies for the output of this non-scan element to be a low state when FlexTest finishes operating the scan chain.

INIT1 — A literal that specifies for the output of this non-scan element to be a high state when FlexTest finishes operating the scan chain.

∙element_pathname

A required repeatable string that specifies the pathname to the non-scan element whose learned behavior you want to reclassify during the time FlexTest operates the scan chain.

∙-Instance

An optional literal that specifies that the element_pathname(s) specified are instance pathnames. This is the default upon invocation.

∙-Module

An optional literal that specifies that the element_pathname(s) specified are module names. All instances with the specified modules are affected by this command as well as the Delete Nonscan Handling command.

Examples

The following example specifies for FlexTest to assume that the given non-scan element is always at a high state, regardless of how the design rules checker determined its behavior:

add nonscan handling tie0 i_6_16 report nonscan handling

TIE0 I_6_16

Related Commands
Delete Nonscan Handling	Set Nonscan Model
Report Nonscan Handling

2-88 FastScan and FlexTest Reference Manual, V8.6_4