
Report Gates | Command Dictionary |
|
|
The following describes the fields for the Test behavior message line:
Identifies whether FastScan can test the RAM in read_only mode. The possible values are:
0 (no)
1 (yes)
Identifies whether FastScan treats the RAM as a tieX gate. The possible values are:
0(no)
1(yes)
Test behavior: Stability=vvvv tiex_flag=v read_only_flag=v ramseq_flags=v/v(vv)
Identifies the following stability behavior for a given RAM, respectively:
write control stability write load stability read control stability read load stability
The possible values are: |
| ||
S | (stable) |
| Identifies the FastScan ram_sequential |
U | (unstable) | ||
|
|
| capabilities for a given RAM: |
| v/v | Two values separated by a “/” |
|
that identifies whether FastScan
can exercise either of the following ram_sequential capabilities:
test the RAM in ram_sequential mode
use held output values in a separate
(vv)Two values indicating the stability behavior for a given RAM
during seq_transparent procedures, respectively:
RAM write values are unstable during seq_transparent procedures. RAM read values are unstable during seq_transparent procedures.
The values can be either of the following:
0(no)
1(yes)
| FastScan and FlexTest Reference Manual, V8.6_4 |