Command Dictionary | Report Drc Rules |
|
|
∙
A switch that displays the following for each
oRule identification number
oNumber of failures of each rule
oCurrent handling status of that rule This is the command’s default.
∙
A switch that displays the following for each
oRule identification number
oNumber of failures of each rule
oCurrent handling status of that rule
oBrief description of that rule.
Examples
The following example changes the severity of the data rule 7 (D7) from a warning to an error and also specifies execution of a full test generation analysis when performing the rules checking for the clock (C) rules:
set drc handling d7 error atpg_analysis set system mode atpg
FastScan and FlexTest Reference Manual, V8.6_4 |