Command Dictionary | Add Notest Points |
|
|
Add Notest Points
Tools Supported: FastScan
Scope: Atpg, Fault, and Good modes
Usage
ADD NOtest Points pin_pathname...
Description
Adds circuit points to list for exclusion from testability insertion.
The Add Notest Points command excludes the specified cell output pins from use as controllability and observability insertion points. If the selected pin is already a control or observe point, an error occurs when you issue this command. You can use the Report Notest Points command to display all the pins in this list.
You use this command primarily for simulating
Arguments
∙pin_pathname
A required repeatable string that lists the output pins that you do not want to use for insertion of controllability and observability.
Examples
The following example specifies output pins that FastScan cannot use for testability insertion:
set system mode fault
add notest points i_1006/o i_1008/o i_1009/o insert testability
report control points report observe points
Related Commands |
|
Delete Notest Points | Report Notest Points |
Insert Testability |
|
FastScan and FlexTest Reference Manual, V8.6_4 |
