Mentor v8.6_4 manual Delete Initial States, ∙ instancepathname

Delete Initial States Command Dictionary

Delete Initial States

Tools Supported: FlexTest

Scope: Setup mode

Prerequisites: You must add initial state settings with the Add Initial States command before you can delete them.

Usage

DELete INitial States instance_pathname... -All

Description

Removes the initial state settings for the specified instance names.

The Delete Initial States command deletes the initial state settings added using the Add Initial States command. You can display a list of the current initial state settings by using the Report Initial States command.

Arguments

∙instance_pathname

A repeatable string that specifies the pathnames of the design hierarchical instances that have initial state settings that you want to remove.

∙-All

A switch that removes all the initial states created with the Add Initial States command.

Examples

The following example creates two initial state settings and then removes one:

add initial states 0 /amm/g30/ff0 /amm/g29/ff0 delete initial states /amm/g30/ff0

Related Commands
Add Initial States	Write Initial States
Report Initial States

2-176 FastScan and FlexTest Reference Manual, V8.6_4