Mentor v8.6_4 manual FastScan Timing Commands

Timing Command DictionaryFastScan Timing Commands

Table A-1. Timing Command Summary [continued]

	F	F
Command/Statement	S	T	Description
SET SPLIT_BIDI_CYCLE	∙	∙	Specifies the period for test procedures and
TIME			splits the non-scan cycle before the force or
			bidi_force time.
SET	∙	∙	Specifies the period for test procedures and
SPLIT_MEASURE_CYCLE			splits the non-scan cycle at the measure
TIME			time.
SET STROBE_WINDOW	∙	∙	Specifies the strobe window width.
TIME
SET TIME SCALE	∙	∙	Sets the time scale and unit.
TIMEPLATE	∙		Defines non-scan event timing.

FastScan Timing Commands

This section describes, in alphabetical order, the commands that FastScan uses to define timing information and enable specific timing checks for test patterns. These commands reside in a timing file--they are not application commands.

Each command description begins on a new page and contains information indicating the context, or scope, for the command’s use.

FastScan and FlexTest Reference Manual, V8.6_4 A-3