Section 5: Printer Configuration

LCD DISPLAY

 

DEFINITION

 

 

 

FORWARD/BACKFEED

3.

If Manual option is selected, use the Cursor keys to advance the distance

DISTANCE

XXXmm

 

to the desired setting. Each time the CURSOR key is pressed, the

 

 

 

distance will advance 1 mm. The maximum distance is 255 mm.

 

 

4.

Press the FEED key to select the option and advance to the next display

 

 

EXT PIN 9 SELECT

Allows selection of the conditions that cause the signal on Pin 9 of the EXT

MODE1

MODE2

connector to be true. If Mode1 is selected, pin 9 will be true when the printer is

 

 

ready to print, i.e. it is on-line and has a print job loaded (a quantity of labels to

 

 

be printed on the display). If Mode 2 is selected, pin 9 will be true if the printer

 

 

is on-line.

 

 

1.

Use the LINE key to step the cursor to the desired option.

 

 

2.

Press the FEED key to select the option and advance to the next display

 

 

 

EURO CODE

 

Allows the dexadecimal code to be specified for the character replaced with

 

D5

the Euro Character. The default is D5H.

 

 

1.

Use the LINE key to step to the desired option of the first character.

 

 

2.

Press the FEED key to select the option and advance the cursor to the

 

 

 

second character of the desired hexadecimal code.

 

 

3.

Repeat steps 1 and 2 for each character.

 

 

4.

Press the FEED key to select the option and advance to the next display

 

 

SELECT LANGUAGE

Allows the selection of the character set used by the printer. The options are

ENGLISH

 

English, French, German, Spanish, Italian and Portuguese.

 

 

1.

Use the LINE key to advance to the desired language option.

 

 

2.

Press the FEED key to select the option and advance to the next display

 

 

IGNORE CAN/DLE

If the printer is placed in the Multi-Item Buffer Mode (DSW2-5 = ON), the user

YES

NO

can choose to ignore CAN (18H) and DLE (10H) commands used in bi-

 

 

directional communications (refer to section: Interface Specifications). If the

 

 

Single Item Buffer Mode is chosen (DSW2-5 = OFF), this display will be

 

 

skipped.

PRIORITY SETTING

Allows the assignment of a priority for Print Darkness, Print Speed, and Print

COMMAND

LCD

Offset setting methods. If LCD is selected, the setting established via the LCD

 

 

display/menu system will be used for an incoming label job, regardless of any

 

 

different command settings. If Command is selected, any commands in the

 

 

label job will take precedence and be used for printing the job.

 

 

1.

Use the LINE key to step to the desired priority option.

 

 

2.

Press the FEED key to select the option and advance to the next display

 

 

LABEL RE-DETECT

Allows disabling the feeding of a blank label upon power up. If Enable is

ENABLE

DISABLE

selected, the printer will automatically feed a label until it detects a label

 

 

image. This will correctly position the next printed label under the print head. If

 

 

Disable is selected, the printer will not attempt detection and the operator is

 

 

responsible for ensuring a correctly positioned label before printing.

 

 

1.

Use the LINE key to step to the desired option.

 

 

2.

Press the FEED key to select the option and advance to the next display

 

 

 

 

M84Pro Service Manual

PN: 9001111A

Page 5-20

Page 53
Image 53
SATO M84PRO EXT PIN 9 Select, MODE1 MODE2, Euro Code, Select Language, English, Ignore CAN/DLE, Priority Setting