SATO M84PRO service manual HEX Dump Mode, QTY000000

Section 5: Printer Configuration

HEX DUMP MODE

In addition to the Test Print Labels, the printer can print the contents of the receive buffer in a hexadecimal format to allow the data stream to be examined for errors and troubleshooting.

LCD DISPLAY		DEFINITION
V 05.00.03.00	Displays the firmware during the initialization.
INITIALIZING
ONLINE	The Hex Dump Mode is entered by placing DSW2-4 in the On position and
QTY:000000	powering the printer on.
	1.	The printer is now ready to receive data.
	2.	Send the data stream to the printer.
	3.	The received data will be printed in a hexadecimal format4.
	4.	To return the printer to normal operation, place DSW2-4 in the off position
		and power the printer off and then back on.

M84Pro Service Manual PN 9001111A Page 5-25