SATO M84PRO MEM Select CC1, Card Memory, Copy Start, Truetype Fontcopy, Card COPY/FORMAT, Copying

Section 5: Printer Configuration

LCD DISPLAY				DEFINITION
MEM SELECT (CC1)		This selection determines which type of optional expanded memory will be
CARD MEMORY		addressed as “CC1" in the command streams. The CARD selection specifies
		the optional PCMCIA card as CC1 and the optional Expanded Flash ROM as
		CC2. The Memory selection specifies the optional Expanded Flash ROM as
		CC1 and the optional PCMCIA card as CC2.
		1.	Use the LINE key to step the cursor to the desired option.
		2.	Press the FEED key to select the option and advance to the next display
CARD->MEMORYCOPY		This selection allows TrueType fonts to be copied from the PCMCIA Memory
TRUETYPEFONT Y/N		card installed in the Memory Card slot.
		1.	Use the LINE key to step the cursor to desired option. If Yes is selected,
			the printer will enter the Card Copy mode. If No is selected, the display will
			advance to the Card to Memory SATO Font Copy mode.
COPY START		2.	Confirm the selection by stepping the cursor to the Yes option. If No is
YES	NO		selected, the display will return to the previous selection.
TRUETYPEFONTCOPY		3.	Press the FEED key to select the option. If Yes was selected the copy
COPYING			process will begin.
TRUETYPE FONTCOPY		4.	Once the copy process is completed, press the FEED key to step the
COMPLETED			display.
CARD COPY/FORMAT		5.	If an error is encountered in the copy process, one of the following
XXXXXXX ERROR			messages will be displayed on the second line:
			R/W Error	Indicates a Read/Write error occured
			No Card Error	Indicates no card was recognized
			Mem Full Error	Indicates that there is insufficient memory
				available.
CARD->MEMORYCOPY		This selection allows SATO fonts to be copied from the PCMCIA Memory card
SATOFONT	Y/N	installed in the Memory Card slot.
		1.	Use the LINE key to step the cursor to desired option. If Yes is selected,
			the printer will enter the Card Copy mode. If No is selected, the display will
			advance to the Card to Memory Copy All mode.
COPY START		2.	Confirm the selection by stepping the cursor to the Yes option. If No is
YES	NO		selected, the display will return to the previous selection.
SATO FONT COPY		3.	Press the FEED key to select the option. If Yes was selected the copy
COPYING			process will begin.
SATO FONT COPY		4.	Press the FEED key to advance to next display.
COMPLETED
CARD COPY/FORMAT		5.	If an error is encountered in the copy process, one of the following
XXXXXXX ERROR			messages will be displayed on the second line:
			R/W Error	Indicates a Read/Write error occured
			No Card Error	Indicates no card was recognized
			Mem Full Error	Indicates that there is insufficient memory
				available.

M84Pro Service Manual PN: 9001111A Page 5-14