Section 8: Adjustment Procedures
PRINT DARKNESS ADJUSTMENT
Print darkness is adjusted by use of the PRINT potentiometer located on the Operator Panel of the front housing cover.
1Turn the PRINT potentiometer to the center position.
2 Turn on the printeries press the LINE key to go
|
|
|
|
|
|
|
|
| LCD DISPLAY: | PRINT DARKNESS |
| ||||
|
| 1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
|
|
|
|
4Press the LINE key to advance the cursor to the desired option.
5Press the FEED key to select the option.
6Turn the printer off and then on again.
7Begin printing test labels antedates the PRINT potentiometer as necessary to achieve the desired results.
NOTE: It may be necessary to repeat the procedure and selecting a different print darkness setting from the operator panel.
M84Pro Service Manual | PN: 9001111A | Page |
