SATO M84PRO service manual Clear Eeprom

Section 9: Factory Resets

WARNING: THIS TEST ACTIVATES ALL THE HEATING ELEMENTS ON

THE PRINT HEAD AND THEREFORE SHOULD BE USED FOR TESTING

PURPOSES ONLY. FULL WIDTH LABELS MUST BE USED TO PREVENT

PRINT HEAD DAMAGE.

12Verify that the counters on the test print have reset to 0.0 km.

13Power Off the printer and confirm that all switches are in the Off or down position.

CLEAR EEPROM

CAUTION: RESETTING THE PRINTER WILL CLEAR ALL REGISTERS.

1 Record all dip switch positions.
2	Place all dip switches in the OFF position.
3	Place the DSW2-4 in the ON position.
4	Simultaneously, press and hold the LINE and FEED keys while turning on the power switch.
5	Release the LINE and FEED keys upon hearing a beep.
		LCD DISPLAY:	INITIALIZING ROM V00.00.00.00
			MAINTENANCE MODE DIPSW2-4 ON->OFF
6	Place the DSW2-4 in the Off position.
		LCD DISPLAY:	FACTORY MODE
7	Press the LINE key to display the next screen.
		LCD DISPLAY:	ALL CLEAR MODE
8	Press the FEED key once to display the next screen.
		LCD DISPLAY:	ALL CLEAR COUNTER
			EEPROM
9	Press the FEED key once to display the next screen.
		LCD DISPLAY:	COUNTER ALL CLEAR
			YES	NO
10 Press the LINE key to scroll to YES.
11	Press the FEED key to clear the EEPROM.
12	Power Off the printer and confirm that all switches are in the Off or down position.

M84Pro Service Manual PN 9001111A Page 9-5